Many factors are essential for plumbing and HVAC system design. One important consideration is balancing different fluids passing through the system. Balancing valves plays a crucial role in allowing proper heat and water flow. Proper flows are pertinent when you need a fully optimized and functioning system.

This article discusses balancing valves, what to consider when buying one, and how to install one.

What is a Balancing Valve?

Standard balance valves are specialized valves for controlling flow. They are used in different plumbing applications to control flow. This control of flow is possible by adequately balancing media such as liquids or gases. Their primary purpose is to ensure a proper flow rate per minute. This flow is supplied to each system or equipment as designed.

Based on these specifications, the technician can control or adjust according to varying requirements. You might need more steam flowing during the night to allow temperature control. This heating isn’t as much as is required during the day. These valves are purposed to work without errors. When they work efficiently, they mitigate any losses. This way, they can help your system achieve the efficiency you need.

How Does a Balancing Valve Work?

A balancing valve works in several key aspects. The primary principle is the pressure differential that needs to be maintained. A balancing valve has special internal parts that must balance different flow rates. This balance is based on your requirements. These parts help keep that flow based on differential pressure. You can measure this pressure based on the valve opening changes.

So, when you want to reduce the valve’s flow, you can throttle or reduce the opening of the valve. This reduction will create higher pressure or more resistance to the flow. This throttle will cause the pressure in the valve to drop, thus reducing the outflow.

Liquid pressure can vary from the source. The balance valves adjust this pressure while maintaining proper flow. The flow must consider variations in pressure and adjust accordingly.

Types of Balancing Valves

Following are some types of balancing valves:

Static Balance Valves

These valves have a constant resistance, which helps control each system flow. You can control the amount of flow accurately through a handle or screw mechanism.

Dynamic Balance Valves

More commonly known as automatic balance valves, they provide constant flow. They keep this constant flow automatically with the help of an internal cartridge. This mechanism helps the valve open or close automatically based on the pressure difference.

Where Do You Need Balancing Valves?

Following are some of the most common applications for balancing valves:

• Irrigation: Your fields receive the proper amount of water evenly. This flow varies by the time of day you install them in agricultural settings.
• HVAC Systems: An industry or a building requires constant temperatures. A balance valve HVAC ensures that each office or building level receives them.
• Water Supply Systems: These are perfect for residential and commercial buildings. Balance valves provide heating and cooling in these buildings. These valves supply consistent water no matter the distance from the water source to the tap.
• Industrial Processes: These valves are also crucial for plants and other industries. Different fluid flow regulations are needed. They must ensure that each operation receives the optimal flow, which leads to optimal operations.

Advantages and Disadvantages of a Balancing Valve

Let’s look at the advantages of balancing valves for your system.

Advantages

• Different zones in your building will get proper flow regardless of distance. There will be no uneven flow whether you need heating or cooling.
• These valves are essential when a system like HVAC must be energy efficient. You don’t want excess heating or cooling going to an area that isn’t required.
• The experience of the residents or workers improves if they have a constant flow.
• The flexibility of controlling the flow based on your system’s specific requirements.

Disadvantages

• Installing them will cost more than regular valves. More features will add more even for pressure balancing valve replacement cost.
• Proper installation and maintenance need a professional. The valve’s complex workings need a professional touch.
• The valves need regular maintenance for their proper functioning.

The Installation Process of a Balancing Valve

When installing or changing a balancing valve, you must ensure proper installation. The technician or plumber pays attention to following proper protocols. Let’s go over the correct steps when following these protocols. Then, we can discuss the essential considerations of choosing the appropriate valve.

How to Install a Balancing Valve?

Please read through these steps carefully to complete the process correctly and efficiently.

1. Tool Preparation

The following are the essential tools when installing a typical balancing valve:

• A pipe wrench
• A screwdriver
• Teflon tape
• Working gloves.

You must also ensure that you buy the proper valve for your system. This consideration takes your specifications into account.

2. Plumbing System Preparation

Make sure you have turned off the water or liquid supply in the area where you are working. Before you start working, you need to ensure that you remove all the medium. You don’t want it to create back pressure that you may need to bleed later. This removal is also essential as you don’t want any leakage during and after the process.

3. Removal of Older Valve

If replacing an older valve, use the pipe wrench to remove it. You need to do this before cleaning and installing the new valve. Turn the wrench in an anti-clockwise direction and keep rotating until you can remove it.

If the balancing valve is heavy, make sure to use proper supports. You can also use hanging wires to prevent damage to the pipes around it or yourself if it falls.

4. Teflon Tape Application

Now, you need to apply a few layers of tape around the pipe and balancing valve threads to secure them together.

5. Installing the New Valve

Before installing the valve, make sure you have aligned the balancing valve threads. These threads must align with the ones on the pipe and then go through the threading process. Rotate the valve in the clockwise direction using your hands and tighten it with a wrench. Please ensure you do not overtighten, as it can deform or damage the threads and the pipe.

6. Checking Leaks

Now turn on the water you closed off at the start to see if everything works as it should. If there are any minor leaks, you must tighten the balancing valve.

7. Checking the Balancing Valve

A balancing valve is a precise device with a flow adjustment meter. This flow allows flow according to the design specifications. In some instances, it comes with fixed Kv from the calibrated orifice. [Ref: Balancing Valve Working]

Check the Kv reading on the top of the valve, as you may need to adjust it before proper operation. So, for example, if your required value of ‘Q’ is 0.7 and the ‘Dp’ is 0.1, it is adjusted for a flow rate of 8 m³/h. This adjustment varies with the diameter of the valve, as explained in the image below:

Turn the knob clockwise until it reaches the pre-regulation value of 80. Then lift the cap from the top of the knob and adjust the screw with the Allen key.

8.  Inspecting the Setting Using a Flow Meter

You also need to make sure you detect the ‘Kv’ value on the valve by the flow meter. The ‘-ve’ terminal goes in the blue while the ‘+ve’ terminal goes in the red opening. This reading will give the flow rate of the valve. Adjust the knob until you reach your desired flow rate. You can also repeat this process for other valves in the system until you get the overall accurate flow.

Technicians sometimes install a differential pressure controller parallel to the flow. Please check the official document to adjust and check accordingly. Different manufacturers will have knob readings differently. Please consult the instructions and working manual to set and check the flow rate. [Ref: Balancing Valve Working]

How to Choose the Right Balancing Valve?

You want your system to function properly and improve performance. To do that, you need the right valve to do that, and choosing the proper one has a few nuances. Here is what you should check when purchasing or selecting the appropriate valve.

Compare with the System Requirements

Make a detailed check of all the valves and piping systems. See which ones need replacement or if some aren’t efficient. You need to make sure the flow rates are optimal for different sections. You also need to check the temperature requirements for each zone. Finally, calculate the different pressure drops you need in each zone. Make sure you are aware of the pressure balancing valve location.

Consulting a Professional

You need an expert to review your data and calculations. If you do not know how to do this, the expert can do it for you at a service fee. The expert advice will allow a proper assessment of your system. This assessment ensures you buy the right one.

Valve Type Consideration

Based on your system’s liquid flow and construction, you may need a static or dynamic valve. You will need a static flow valve if your system has a constant medium flow. If your system has dynamic flow, you choose a dynamic valve.

Important Features

A few standard features of balancing valves are as follows:

• adjustable flow rates
• working temperature ranges
• variable pressure ratings.

Look for different flow and control markings to make things easier for technicians.

Cost Consideration

The more features added, the higher the price. Typical functional valves will cost less because of fewer features. So, depending on how much you can spend, you can choose one or two of these requirements.

Reliable Supplier

You need a supplier with experience in what they make. They must also have a good rating online or have good regular customers. Furthermore, they can be outstanding in the long term due to their good after-sales services.

Expert suppliers also must have a wide variety for industry or residential use. This variety can include items such as a pressure balance shower valve kit, इ., that you can buy.

Final Words

The core functionality of a balancing valve is to increase a system’s efficiency. They can do this whether it’s plumbing, HVAC, or heating and cooling systems. They offer more functionality than other valve types. This functionality is true even though they cost more than regular valves. They can usually be of even better quality.

The installation process is simple, regardless of the type or use of the balancing valve. A professional can provide the best care and maintenance for these valves.